-40%
Super Fill High Build 2K Urethane Primer Gray Quart Kit, SS-2790G-Q/SS-2790A-8
Super Fill High Build 2K Urethane Primer Gray Quart Kit, SS-2790G-Q/SS-2790A-8
Super Fill High Build 2K Urethane Primer Gray Quart Kit, SS-2790G-Q/SS-2790A-8

Super Fill High Build 2K Urethane Primer Gray Quart Kit, SS-2790G-Q/SS-2790A-8

$ 20.59

Availability: 151 in stock
  • Returns Accepted: Returns Accepted
  • Brand: speedokote
  • Bundled Kit Components: Activator/Hardener
  • Item must be returned within: 30 Days
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Primary Color: Gray
  • Restocking Fee: 20%
  • Refund will be given as: Money Back
  • Items Included: Activator/Hardener
  • Manufacturer Part Number: SS-2790G-Q/SS-2790A-8
  • Type: Urethane Primer

    Description

    This product is not available in California, Maryland, or Delaware. Please order SMR-221.  Please note, If you order this product to be shipped to these states, a replacement may be used and will delay your shipping.
    This sale is for a quart kit of Super Fill High Build 2K Urethane Primer Gray Quart Kit, SS-2790G-Q/SS-2790A-8.
    The
    SS-2790G/SS-2790A
    is a 4.8 lbs/gallon voc (National Rule product).
    Not for sale in 2.1 lbs/gallon voc areas.
    The
    SS-2790G/SS-2790A
    is a fast dry, easy sanding 2K urethane primer with great fill, and color/gloss holdout.
    - Easy 4:1 mix
    - Super High build and fill
    - Sands great
    - Great adhesion
    - Medium gray color
    - Fast dry
    - True 2K urethane
    - Excellent value (cost)
    Not for sale in California, Maryland or Delaware
    Health and Safety:
    See Material Safety Data Sheet and labels for additional safety information and handling instructions.
    *
    The contents of this package may have to be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels and MSDS’s of all components, since
    the mixture will have the hazards of all its parts.
    * Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury.
    * Follow spray equipment manufacturer’s instructions to prevent personal injury or fire.
    * Provide adequate ventilation for health and fire hazard control.
    *
    Follow company, product MSDS and respirator manufacturer’s recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory
    requirements.
    * Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS.
    * Always observe all applicable precautions and follow good safety and hygiene practices.