Spray Putty 400ml Aerosol x6 spray cans automotive High quality filler Autobody

Description

Spray Putty 400ml Aerosol x6 spray cans automotive High quality filler
FREE SHIPPING!
CHAMÄLEON SPRAY PUTTY
High quality, fast drying putty to align small irregularities
Corrosion preventive
High coverage
Fast drying
400ml per aerosol
Made in Germany
General characteristics:
High quality, fast-drying filler to fill small
irregularities in surfaces, treated and untreated,
of wood, metal and aluminum. Suitable primer as
pre treatment for re-spraying with all lacquer
systems (alkyd resin, nitro cellulose, 1-K
acrylic and 2-K acrylic lacquers).
Product characteristics:
Fast drying
Excellent coverage
Corrosion preventive
Easy to sand, both wet and dry (from grain
400)
Excellent filling property
Good adhesion
Re-sprayable with all lacquer systems
Physical and Chemical Characteristics
Contents:                            400 ml
Base:                                  Acrylic resin
Color:                                 Beige-yellow
VOC-content:                     Approximately 75% w/w
Solid content:                     Approximately 25% w/w
Gloss:                                Satin matt
Coverage:                         1,25 to 1,75 m²
Dust dry:                            After 5 to 10 minutes
Tack free:                          After 1 to 20 minutes
Hardened/re-sprayable:    After 2 hours
Heat resistant:                  To 110 °C
Usage:
Chamäleon GmbH – Technical Data Sheet
Before use, carefully read the directions on the packaging and act accordingly.
Pre Treatment:
The surface should be clean, dry and free of
grease. Remove loose old lacquer and rust and
sand the surface.
Treatment:
The surface should be clean, dry and free of
grease. The aerosol should be at room
temperature. Best processing temperature 15 to
25°C.
Before use, shake the aerosol for 2 minutes
and spray a sample.
Distance to the surface to be
treated approximately 25 to 30 centimeter.
Apply the filler in several thin layers. Before
applying the next layer, again shake the aerosol.
After use:
After use, clean the valve (turn aerosol upside
down and press the nozzle for approximately 5
seconds).